1911 classic royal blue Options
1911 classic royal blue Options
Blog Article
Just shoot it after which see In case the extractor demands tuning or changing. As far as replacing the plastic MSH, get it done. I stopped replacing mine because frankly I've like thirty-a thing Colts. The money I set in replacing the plastic MSH, I should buy A further Colt with it.
Far too much extra do the job to mill in a aid with the plunger tube, I suppose-- Or also low-cost/lazy to spec a conventional grip profile from their vendor (does Colt even make any in their OEM wood grips?)?
Avoid the temptation to replace areas on the brand name-new 1911 just to really make it "much better". Determine what you might be switching out and why.
You might devote lots of money repairing things that weren't damaged to start with. Shoot at the very least 500 rounds as a result of it first, then come to a decision Anything you do not like and need to further improve.
As great as the Classic is, it's a hybrid S70/S80 with pre-70 rollmarks. If I had to start out advertising off guns This is able to go prolonged in advance of my pre-70 Colts or my S70 reproductions.
The rounds are of course sandblasted matte. The checkered Wooden grips in fact look rather good to my eyes, and I will most likely hold them about the pistol for the time being. I did swap the mainspring housing by having an arched metal Colt device immediately after I took these images, but in this article you're looking at it as it came straight out on the box.
BTW here is a thing that baffles me. On Gunbroker There is certainly an auction for one which began in a penny without reserve.
This can be an more mature thread, you might not get a reaction, and could be reviving an outdated thread. You should take into account making a new thread.
Or get a decent fitting holster and accomplishing a few hundred attracts and find out When the marks website easy out a little before calling Turnbull. If I have to get new marks put in and refinish I would just have The complete issue stripped and parkerized. I like just about every factor relating to this gun apart from those burrs.
I haven't viewed the classic version during the flesh yet but in the photos, the end looks akin to the later run of 70 series with the 73B0500 as well as serial variety. Is the fact an accurate observation?
By introducing this design, Nighthawk is bridging the hole amongst the devoted 1911 company and the solo gunsmith who only performs on someone else's product or service. Wilson will it on Glocks and Berettas, now last but not least, Nighthawk custom made is performing it on the at any time well-known Colt 1911.
I had been expecting the SKU to stick to Colt's regular components and become O1011C. As a substitute I see It can be O1911C-SS which can be a whole new way of executing things.
I accustomed to make multi-spot holders for person stamps, but first I'd to generate a fixture to grind them to even lengths over a area grinder.
Increase to estimate Only present this consumer #40 · Jul twenty, 2024 I do not blame the OP for currently being pissed to check out that terrible ding over the back again from the slide. That could've created anybody's blood boil if it had been their pistol.